Licença Para Pcdj Red 5.2

requiem

requiem The rifle is the weapon most widely used, supplied mainly to the Space Marines, the Sisters of Battle and the Chaos Space Marines Its shape is both guns (square-shaped, single or double hand grip, no locks on the back shoulder of a gun) that the machine guns, from which it takes the high rate of fire and location of the loader positioned in a housing separate from the handle. Rifles requiem are considered the voice of the Emperor, who roar his name lethal explosive projectiles against enemies of the Imperium, which is why the Space Marines bless their requiem and treat them with extreme care, being seen as the personification of the emperor.

requiem guns shoot bullets caliber 0.75, similar to small missile containing a liquid propellant and explosive burst late in the tip of adamianto pierces the enemy's armor and then explode inside the body, killing almost always the enemy instantly.

Needed

slab of polyurethane foam (I used a 2-cm)
cap bottle (or something similar)
Sticks
skewers for plywood (or a few millimeters thick plastic)
cutter sizes
gun hot

process design and choice of size is essential, it is difficult to make eye.

Use a pencil and draw three shapes which include the same handle (the left-hand) and the upper part of the requiem (green zone thickness 6cm). Draw two identical shapes of the lower part of the requiem (4 cm thick pink area), design magazine and handle details (only a silhouette (2cm thick).

With a sharp knife to cut the shapes, it is better to abound as the polyurethane is easily honing with sandpaper stuck on a piece of wood, can grind the same way two or more shapes equal. (The outline of this picture is wrong, I had to remove the final part of all 3)

Taking care to keep the blade perpendicular to the sheet of polyurethane remove the parts, at least the main ones, and paste between them before the same shapes (pink and green) fit together and then smoothing the two shares obtained thereby and paste them in turn.

At this point with the above-mentioned sanding system (paper thin) to achieve equal areas. Now add the details, cutting and pasting pieces or a complete sculpting the main body of the requiem. I've made them with some details of plywood, cut it in thin layers the polyurethane is very complicated: D. The Sticks have used them to pierce the grip and to reinforce the attack with the rest of the gun, fearing that it could break the grip I speared in a dozen different directions.

With the cap of the bottle I realized the barrel of a requiem for even making round shapes and precise is a bit complicated, with a sharp knife and sandpaper to create 3 holes and two large front a small cross. I finally finished with stucco and have spread a layer of polyester resin to create a solid layer over the polyurethane that is easily dented.

in the next post shall start with the construction of the helmet and armature ... stay tuned!